网络编辑平台

编辑出版

《热加工工艺》编辑部

  电话:029-38316271;029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


09CuPTiRE钢的高温塑性变形行为分析
Analysis on Hot Plastic Deformation Behavior of 09CuPTiRE Steel
杨意萍
点击:5968次 下载:0次
作者单位:山东工业职业学院 冶金学院, 山东 淄博 256414
中文关键字:热模拟试验; 流变曲线; 双曲正弦; 再结晶图; 动态软化率
英文关键字:hot simulation test; flow curves; hyperbolic sine; diagram of dynamic recrystallization; dynamic softening rate
中文摘要:基于单道次热模拟试验,绘制了09CuPTiRe钢完整的高温流变曲线,建立了09CuPTiRe钢的双曲正弦本构方程,确定了09CuPTiRe钢的再结晶图及动态再结晶软化率。 结果表明:流变曲线计算值与实验值吻合良好;实验变形条件下,应变速率对09CuPTiRe钢的动态再结晶起主要作用,动态再结晶软化率与变形温度、应变速率满足线性关系。
英文摘要:Based on hot compression test, the complete and continuous flow curves were established. Hyperbolic sine constitutive equation, diagrams of dynamic recrystallization and dynamic softening rate were obtained. The results show that the calculated flow stress curves agree well with experimental results. Under experimental deformation condition, the strain rate plays a major role in the dynamic recrystallization, and dynamic softening rate has a linear relationship with deformation temperature and strain rate, respectively.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
版权所有©2026热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发